By default, Apache Pulsar clients communicate with the Apache Pulsar service in plain text, which means that all data is sent in the clear. TLS can be used to encrypt this traffic so that it cannot be snooped by a man-in-the-middle attacker.
TLS can be configured for both encryption and authentication. You may configure just TLS transport encryption, which is covered in this guide. TLS authentication is covered elsewhere. Alternatively, you can use another authentication mechanism on top of TLS transport encryption.
Note that enabling TLS may have a performance impact due to encryption overhead.
TLS is a form of public key cryptography. Encryption is performed using key pairs consisting of a public key and a private key. Messages are encrypted with the public key and can be decrypted with the private key.
To use TLS transport encryption, you need two kinds of key pairs, server key pairs and a certificate authority.
A third kind of key pair, client key pairs, are used for client authentication.
The certificate authority private key should be stored in a very secure location (a fully encrypted, disconnected, air gapped computer). The certificate authority public key, the trust cert, can be freely shared.
For both client and server key pairs, the administrator first generates a private key and a certificate request. Then the certificate authority private key is used to sign the certificate request, generating a certificate. This certificate is the public key for the server/client key pair.
For TLS transport encryption, the clients can use the trust cert to verify that the server they are talking to has a key pair that was signed by the certificate authority. A man-in-the-middle attacker would not have access to the certificate authority, so they couldn't create a server with such a key pair.
For TLS authentication, the server uses the trust cert to verify that the client has a key pair that was signed by the certificate authority. The Common Name of the client cert is then used as the client's role token (see Overview).
Creating TLS Certificates
The following guide is an abridged guide to setting up a certificate authority. For a more detailed guide, there are plenty of resource on the internet. We recommend the this guide.
The first step is to create the certificate for the CA. The CA will be used to sign both the broker and client certificates, in order to ensure that each party will trust the others. The CA should be stored in a very secure location (ideally completely disconnected from networks, air gapped, and fully encrypted).
Create a directory for your CA, and place this openssl configuration file in the directory. You may want to modify the default answers for company name and department in the configuration file. Export the location of the CA directory to the environment variable, CA_HOME. The configuration file uses this environment variable to find the rest of the files and directories needed for the CA.
$ mkdir my-ca $ cd my-ca $ wget https://github.com/apache/incubator-pulsar/tree/master/site2/website/static/examples/openssl.cnf $ export CA_HOME=$(pwd)
Create the necessary directories, keys and certs.
$ mkdir certs crl newcerts private $ chmod 700 private/ $ touch index.txt $ echo 1000 > serial $ openssl genrsa -aes256 -out private/ca.key.pem 4096 $ chmod 400 private/ca.key.pem $ openssl req -config openssl.cnf -key private/ca.key.pem \ -new -x509 -days 7300 -sha256 -extensions v3_ca \ -out certs/ca.cert.pem $ chmod 444 certs/ca.cert.pem
After answering the question prompts, this will store CA-related files in the
./my-ca directory. Within that directory:
certs/ca.cert.pemis the public certificate. It is meant to be distributed to all parties involved.
private/ca.key.pemis the private key. This is only needed when signing a new certificate for either broker or clients and it must be safely guarded.
Once a CA certificate has been created, you can create certificate requests and sign them with the CA.
The following commands will ask you a few questions and then create the certificates. When asked for the common name, you should match the hostname of the broker. You could also use a wildcard to match a group of broker hostnames, for example
*.broker.usw.example.com. This ensures that the same certificate can be reused on multiple machines.
Sometimes it is not possible or makes no sense to match the hostname, such as when the brokers are created with random hostnames, or you plan to connect to the hosts via their IP. In this case, the client should be configured to disable TLS hostname verification.
First generate the key.
$ openssl genrsa -out broker.key.pem 2048
The broker expects the key to be in PKCS 8 format, so convert it.
$ openssl pkcs8 -topk8 -inform PEM -outform PEM \ -in broker.key.pem -out broker.key-pk8.pem -nocrypt
Generate the certificate request...
$ openssl req -config openssl.cnf \ -key broker.key.pem -new -sha256 -out broker.cert.pem
... and sign it with the certificate authority.
$ openssl ca -config openssl.cnf -extensions server_cert \ -days 1000 -notext -md sha256 \ -in broker.csr.pem -out broker.cert.pem
At this point, you have a cert,
broker.cert.pem, and a key,
broker.key-pk8.pem, which can be used along with
ca.cert.pem to configure TLS transport encryption for your broker and proxy nodes.
Add these values to the configuration file (substituting the appropriate certificate paths where necessary):
tlsEnabled=true tlsCertificateFilePath=/path/to/broker.cert.pem tlsKeyFilePath=/path/to/broker.key-pk8.pem tlsTrustCertsFilePath=/path/to/ca.cert.pem
A full list of parameters available in the
conf/broker.conffile, as well as the default values for those parameters, can be found in Broker Configuration
Proxies need to configure TLS in two directions, for clients connecting to the proxy, and for the proxy to be able to connect to brokers.
# For clients connecting to the proxy tlsEnabledInProxy=true tlsCertificateFilePath=/path/to/broker.cert.pem tlsKeyFilePath=/path/to/broker.key-pk8.pem tlsTrustCertsFilePath=/path/to/ca.cert.pem # For the proxy to connect to brokers tlsEnabledWithBroker=true brokerClientTrustCertsFilePath=/path/to/ca.cert.pem
When TLS transport encryption is enabled, you need to configure the client to use
https:// and port 8443 for the web service URL, and
pulsar+ssl:// and port 6651 for the broker service URL.
As the server certificate you generated above doesn't belong to any of the default trust chains, you also need to either specify the path the trust cert (recommended), or tell the client to allow untrusted server certs.
You'll need to add the following parameters to that file to use TLS transport with Pulsar's CLI tools:
webServiceUrl=https://broker.example.com:8443/ brokerServiceUrl=pulsar+ssl://broker.example.com:6651/ useTls=true tlsAllowInsecureConnection=false tlsTrustCertsFilePath=/path/to/ca.cert.pem
import org.apache.pulsar.client.api.PulsarClient; PulsarClient client = PulsarClient.builder() .serviceUrl("pulsar+ssl://broker.example.com:6651/") .enableTls(true) .tlsTrustCertsFilePath("/path/to/ca.cert.pem") .build();
from pulsar import Client client = Client("pulsar+ssl://broker.example.com:6651/", tls_trust_certs_file_path="/path/to/ca.cert.pem", tls_allow_insecure_connection=False)
true); config.setTlsTrustCertsFilePath("/path/to/ca.cert.pem"); config.setTlsAllowInsecureConnection(false); pulsar::Client client("pulsar+ssl://broker.example.com:6651/", config);pulsar::ClientConfiguration config; config.setUseTls(