Pulsar Metrics
Pulsar exposes the following metrics in Prometheus format. You can monitor your clusters with those metrics.
The following types of metrics are available:
- Counter: a cumulative metric that represents a single monotonically increasing counter. The value increases by default. You can reset the value to zero or restart your cluster.
- Gauge: a metric that represents a single numerical value that can arbitrarily go up and down.
- Histogram: a histogram samples observations (usually things like request durations or response sizes) and counts them in configurable buckets. The
_bucketsuffix is the number of observations within a histogram bucket, configured with parameter{le="<upper inclusive bound>"}. The_countsuffix is the number of observations, shown as a time series and behaves like a counter. The_sumsuffix is the sum of observed values, also shown as a time series and behaves like a counter. These suffixes are together denoted by_*in this doc. - Summary: similar to a histogram, a summary samples observations (usually things like request durations and response sizes). While it also provides a total count of observations and a sum of all observed values, it calculates configurable quantiles over a sliding time window.
ZooKeeper
The ZooKeeper metrics are exposed under "/metrics" at port 8000. You can use a different port by configuring the stats_server_port system property.
Server metrics
| Name | Type | Description |
|---|---|---|
| zookeeper_server_znode_count | Gauge | The number of z-nodes stored. |
| zookeeper_server_data_size_bytes | Gauge | The total size of all of z-nodes stored. |
| zookeeper_server_connections | Gauge | The number of currently opened connections. |
| zookeeper_server_watches_count | Gauge | The number of watchers registered. |
| zookeeper_server_ephemerals_count | Gauge | The number of ephemeral z-nodes. |
Request metrics
| Name | Type | Description |
|---|---|---|
| zookeeper_server_requests | Counter | The total number of requests received by a particular server. |
| zookeeper_server_requests_latency_ms | Summary | The requests latency calculated in milliseconds. Available labels: type (write, read).
|
BookKeeper
The BookKeeper metrics are exposed under "/metrics" at port 8000. You can change the port by updating prometheusStatsHttpPort
in the bookkeeper.conf configuration file.
Server metrics
| Name | Type | Description |
|---|---|---|
| bookie_SERVER_STATUS | Gauge | The server status for bookie server.
|
| bookkeeper_server_ADD_ENTRY_count | Counter | The total number of ADD_ENTRY requests received at the bookie. The success label is used to distinguish successes and failures. |
| bookkeeper_server_READ_ENTRY_count | Counter | The total number of READ_ENTRY requests received at the bookie. The success label is used to distinguish successes and failures. |
| bookie_WRITE_BYTES | Counter | The total number of bytes written to the bookie. |
| bookie_READ_BYTES | Counter | The total number of bytes read from the bookie. |
| bookkeeper_server_ADD_ENTRY_REQUEST | Summary | The summary of request latency of ADD_ENTRY requests at the bookie. The success label is used to distinguish successes and failures. |
| bookkeeper_server_READ_ENTRY_REQUEST | Summary | The summary of request latency of READ_ENTRY requests at the bookie. The success label is used to distinguish successes and failures. |
Journal metrics
| Name | Type | Description |
|---|---|---|
| bookie_journal_JOURNAL_SYNC_count | Counter | The total number of journal fsync operations happening at the bookie. The success label is used to distinguish successes and failures. |
| bookie_journal_JOURNAL_QUEUE_SIZE | Gauge | The total number of requests pending in the journal queue. |
| bookie_journal_JOURNAL_FORCE_WRITE_QUEUE_SIZE | Gauge | The total number of force write (fsync) requests pending in the force-write queue. |
| bookie_journal_JOURNAL_CB_QUEUE_SIZE | Gauge | The total number of callbacks pending in the callback queue. |
| bookie_journal_JOURNAL_ADD_ENTRY | Summary | The summary of request latency of adding entries to the journal. |
| bookie_journal_JOURNAL_SYNC | Summary | The summary of fsync latency of syncing data to the journal disk. |
Storage metrics
| Name | Type | Description |
|---|---|---|
| bookie_ledgers_count | Gauge | The total number of ledgers stored in the bookie. |
| bookie_entries_count | Gauge | The total number of entries stored in the bookie. |
| bookie_write_cache_size | Gauge | The bookie write cache size (in bytes). |
| bookie_read_cache_size | Gauge | The bookie read cache size (in bytes). |
| bookie_DELETED_LEDGER_COUNT | Counter | The total number of ledgers deleted since the bookie has started. |
| bookie_ledger_writable_dirs | Gauge | The number of writable directories in the bookie. |
Broker
The broker metrics are exposed under "/metrics/" at port 8080. You can change the port by updating webServicePort to a different port
in the broker.conf configuration file.
All the metrics exposed by a broker are labelled with cluster=\$\{pulsar_cluster\}. The name of Pulsar cluster is the value of \$\{pulsar_cluster\}, which you have configured in the broker.conf file.
The following metrics are available for broker:
- Namespace metrics
- Topic metrics
- ManagedLedgerCache metrics
- ManagedLedger metrics
- LoadBalancing metrics
- Subscription metrics
- Consumer metrics
- ManagedLedger bookie client metrics
- Jetty metrics
Namespace metrics
Namespace metrics are only exposed when
exposeTopicLevelMetricsInPrometheusis set tofalse.
All the namespace metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you configured inbroker.conf. - namespace:
namespace=\$\{pulsar_namespace\}.\$\{pulsar_namespace\}is the namespace name.
| Name | Type | Description |
|---|---|---|
| pulsar_topics_count | Gauge | The number of Pulsar topics of the namespace owned by this broker. |
| pulsar_subscriptions_count | Gauge | The number of Pulsar subscriptions of the namespace served by this broker. |
| pulsar_producers_count | Gauge | The number of active producers of the namespace connected to this broker. |
| pulsar_consumers_count | Gauge | The number of active consumers of the namespace connected to this broker. |
| pulsar_rate_in | Gauge | The total message rate of the namespace coming into this broker (messages/second). |
| pulsar_rate_out | Gauge | The total message rate of the namespace going out from this broker (messages/second). |
| pulsar_throughput_in | Gauge | The total throughput of the namespace coming into this broker (bytes/second). |
| pulsar_throughput_out | Gauge | The total throughput of the namespace going out from this broker (bytes/second). |
| pulsar_storage_size | Gauge | The total storage size of the topics in this namespace owned by this broker (bytes). |
| pulsar_storage_backlog_size | Gauge | The total backlog size of the topics of this namespace owned by this broker (messages). |
| pulsar_storage_offloaded_size | Gauge | The total amount of the data in this namespace offloaded to the tiered storage (bytes). |
| pulsar_storage_write_rate | Gauge | The total message batches (entries) written to the storage for this namespace (message batches / second). |
| pulsar_storage_read_rate | Gauge | The total message batches (entries) read from the storage for this namespace (message batches / second). |
| pulsar_subscription_delayed | Gauge | The total message batches (entries) are delayed for dispatching. |
| pulsar_storage_write_latency_le_* | Histogram | The entry rate of a namespace that the storage write latency is smaller with a given threshold. Available thresholds:
|
| pulsar_entry_size_le_* | Histogram | The entry rate of a namespace that the entry size is smaller with a given threshold. Available thresholds:
|
Replication metrics
If a namespace is configured to be replicated among multiple Pulsar clusters, the corresponding replication metrics is also exposed when replicationMetricsEnabled is enabled.
All the replication metrics are also labelled with remoteCluster=\$\{pulsar_remote_cluster\}.
| Name | Type | Description |
|---|---|---|
| pulsar_replication_rate_in | Gauge | The total message rate of the namespace replicating from remote cluster (messages/second). |
| pulsar_replication_rate_out | Gauge | The total message rate of the namespace replicating to remote cluster (messages/second). |
| pulsar_replication_throughput_in | Gauge | The total throughput of the namespace replicating from remote cluster (bytes/second). |
| pulsar_replication_throughput_out | Gauge | The total throughput of the namespace replicating to remote cluster (bytes/second). |
| pulsar_replication_backlog | Gauge | The total backlog of the namespace replicating to remote cluster (messages). |
Topic metrics
Topic metrics are only exposed when
exposeTopicLevelMetricsInPrometheusis set totrue.
All the topic metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you configured inbroker.conf. - namespace:
namespace=\$\{pulsar_namespace\}.\$\{pulsar_namespace\}is the namespace name. - topic:
topic=\$\{pulsar_topic\}.\$\{pulsar_topic\}is the topic name.
| Name | Type | Description |
|---|---|---|
| pulsar_subscriptions_count | Gauge | The number of Pulsar subscriptions of the topic served by this broker. |
| pulsar_producers_count | Gauge | The number of active producers of the topic connected to this broker. |
| pulsar_consumers_count | Gauge | The number of active consumers of the topic connected to this broker. |
| pulsar_rate_in | Gauge | The total message rate of the topic coming into this broker (messages/second). |
| pulsar_rate_out | Gauge | The total message rate of the topic going out from this broker (messages/second). |
| pulsar_throughput_in | Gauge | The total throughput of the topic coming into this broker (bytes/second). |
| pulsar_throughput_out | Gauge | The total throughput of the topic going out from this broker (bytes/second). |
| pulsar_storage_size | Gauge | The total storage size of the topics in this topic owned by this broker (bytes). |
| pulsar_storage_backlog_size | Gauge | The total backlog size of the topics of this topic owned by this broker (messages). |
| pulsar_storage_offloaded_size | Gauge | The total amount of the data in this topic offloaded to the tiered storage (bytes). |
| pulsar_storage_backlog_quota_limit | Gauge | The total amount of the data in this topic that limit the backlog quota (bytes). |
| pulsar_storage_write_rate | Gauge | The total message batches (entries) written to the storage for this topic (message batches / second). |
| pulsar_storage_read_rate | Gauge | The total message batches (entries) read from the storage for this topic (message batches / second). |
| pulsar_subscription_delayed | Gauge | The total message batches (entries) are delayed for dispatching. |
| pulsar_storage_write_latency_le_* | Histogram | The entry rate of a topic that the storage write latency is smaller with a given threshold. Available thresholds:
|
| pulsar_entry_size_le_* | Histogram | The entry rate of a topic that the entry size is smaller with a given threshold. Available thresholds:
|
| pulsar_in_bytes_total | Counter | The total number of bytes received for this topic |
| pulsar_in_messages_total | Counter | The total number of messages received for this topic |
| pulsar_out_bytes_total | Counter | The total number of bytes read from this topic |
| pulsar_out_messages_total | Counter | The total number of messages read from this topic |
Replication metrics
If a namespace that a topic belongs to is configured to be replicated among multiple Pulsar clusters, the corresponding replication metrics is also exposed when replicationMetricsEnabled is enabled.
All the replication metrics are labelled with remoteCluster=\$\{pulsar_remote_cluster\}.
| Name | Type | Description |
|---|---|---|
| pulsar_replication_rate_in | Gauge | The total message rate of the topic replicating from remote cluster (messages/second). |
| pulsar_replication_rate_out | Gauge | The total message rate of the topic replicating to remote cluster (messages/second). |
| pulsar_replication_throughput_in | Gauge | The total throughput of the topic replicating from remote cluster (bytes/second). |
| pulsar_replication_throughput_out | Gauge | The total throughput of the topic replicating to remote cluster (bytes/second). |
| pulsar_replication_backlog | Gauge | The total backlog of the topic replicating to remote cluster (messages). |
ManagedLedgerCache metrics
All the ManagedLedgerCache metrics are labelled with the following labels:
- cluster: cluster=${pulsar_cluster}. ${pulsar_cluster} is the cluster name that you have configured in the
broker.conffile.
| Name | Type | Description |
|---|---|---|
| pulsar_ml_cache_evictions | Gauge | The number of cache evictions during the last minute. |
| pulsar_ml_cache_hits_rate | Gauge | The number of cache hits per second. |
| pulsar_ml_cache_hits_throughput | Gauge | The amount of data is retrieved from the cache in byte/s |
| pulsar_ml_cache_misses_rate | Gauge | The number of cache misses per second |
| pulsar_ml_cache_misses_throughput | Gauge | The amount of data is retrieved from the cache in byte/s |
| pulsar_ml_cache_pool_active_allocations | Gauge | The number of currently active allocations in direct arena |
| pulsar_ml_cache_pool_active_allocations_huge | Gauge | The number of currently active huge allocation in direct arena |
| pulsar_ml_cache_pool_active_allocations_normal | Gauge | The number of currently active normal allocations in direct arena |
| pulsar_ml_cache_pool_active_allocations_small | Gauge | The number of currently active small allocations in direct arena |
| pulsar_ml_cache_pool_active_allocations_tiny | Gauge | The number of currently active tiny allocations in direct arena |
| pulsar_ml_cache_pool_allocated | Gauge | The total allocated memory of chunk lists in direct arena |
| pulsar_ml_cache_pool_used | Gauge | The total used memory of chunk lists in direct arena |
| pulsar_ml_cache_used_size | Gauge | The size in byte used to store the entries payloads |
| pulsar_ml_count | Gauge | The number of currently opened managed ledgers |
ManagedLedger metrics
All the managedLedger metrics are labelled with the following labels:
- cluster: cluster=${pulsar_cluster}. ${pulsar_cluster} is the cluster name that you have configured in the
broker.conffile. - namespace: namespace=${pulsar_namespace}. ${pulsar_namespace} is the namespace name.
- quantile: quantile=${quantile}. Quantile is only for
Histogramtype metric, and represents the threshold for given Buckets.
| Name | Type | Description |
|---|---|---|
| pulsar_ml_AddEntryBytesRate | Gauge | The bytes/s rate of messages added |
| pulsar_ml_AddEntryErrors | Gauge | The number of addEntry requests that failed |
| pulsar_ml_AddEntryLatencyBuckets | Histogram | The latency of adding a ledger entry with a given quantile (threshold), including time spent on waiting in queue on the broker side Available quantile:
|
| pulsar_ml_AddEntryLatencyBuckets_OVERFLOW | Gauge | The number of times the AddEntryLatency is longer than 1 second |
| pulsar_ml_AddEntryMessagesRate | Gauge | The msg/s rate of messages added |
| pulsar_ml_AddEntrySucceed | Gauge | The number of addEntry requests that succeeded |
| pulsar_ml_EntrySizeBuckets | Histogram | The added entry size of a ledger with a given quantile. Available quantile:
|
| pulsar_ml_EntrySizeBuckets_OVERFLOW | Gauge | The number of times the EntrySize is larger than 1MB |
| pulsar_ml_LedgerSwitchLatencyBuckets | Histogram | The ledger switch latency with a given quantile. Available quantile:
|
| pulsar_ml_LedgerSwitchLatencyBuckets_OVERFLOW | Gauge | The number of times the ledger switch latency is longer than 1 second |
| pulsar_ml_LedgerAddEntryLatencyBuckets | Histogram | The latency for bookie client to persist a ledger entry from broker to BookKeeper service with a given quantile (threshold). Available quantile:
|
| pulsar_ml_LedgerAddEntryLatencyBuckets_OVERFLOW | Gauge | The number of times the LedgerAddEntryLatency is longer than 1 second |
| pulsar_ml_MarkDeleteRate | Gauge | The rate of mark-delete ops/s |
| pulsar_ml_NumberOfMessagesInBacklog | Gauge | The number of backlog messages for all the consumers |
| pulsar_ml_ReadEntriesBytesRate | Gauge | The bytes/s rate of messages read |
| pulsar_ml_ReadEntriesErrors | Gauge | The number of readEntries requests that failed |
| pulsar_ml_ReadEntriesRate | Gauge | The msg/s rate of messages read |
| pulsar_ml_ReadEntriesSucceeded | Gauge | The number of readEntries requests that succeeded |
| pulsar_ml_StoredMessagesSize | Gauge | The total size of the messages in active ledgers (accounting for the multiple copies stored) |
LoadBalancing metrics
All the loadbalancing metrics are labelled with the following labels:
- cluster: cluster=${pulsar_cluster}. ${pulsar_cluster} is the cluster name that you have configured in the
broker.conffile. - broker: broker=${broker}. ${broker} is the IP address of the broker
- metric: metric="loadBalancing".
| Name | Type | Description |
|---|---|---|
| pulsar_lb_bandwidth_in_usage | Gauge | The broker inbound bandwith usage (in percent). |
| pulsar_lb_bandwidth_out_usage | Gauge | The broker outbound bandwith usage (in percent). |
| pulsar_lb_cpu_usage | Gauge | The broker cpu usage (in percent). |
| pulsar_lb_directMemory_usage | Gauge | The broker process direct memory usage (in percent). |
| pulsar_lb_memory_usage | Gauge | The broker process memory usage (in percent). |
BundleUnloading metrics
All the bundleUnloading metrics are labelled with the following labels:
- cluster: cluster=${pulsar_cluster}. ${pulsar_cluster} is the cluster name that you have configured in the
broker.conffile. - metric: metric="bundleUnloading".
| Name | Type | Description |
|---|---|---|
| pulsar_lb_unload_broker_count | Counter | Unload broker count in this bundle unloading |
| pulsar_lb_unload_bundle_count | Counter | Bundle unload count in this bundle unloading |
BundleSplit metrics
All the bundleUnloading metrics are labelled with the following labels:
- cluster: cluster=${pulsar_cluster}. ${pulsar_cluster} is the cluster name that you have configured in the
broker.conffile. - metric: metric="bundlesSplit".
| Name | Type | Description |
|---|---|---|
| pulsar_lb_bundles_split_count | Counter | The total count of bundle split in this leader broker |
Subscription metrics
Subscription metrics are only exposed when
exposeTopicLevelMetricsInPrometheusis set totrue.
All the subscription metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile. - namespace:
namespace=\$\{pulsar_namespace\}.\$\{pulsar_namespace\}is the namespace name. - topic:
topic=\$\{pulsar_topic\}.\$\{pulsar_topic\}is the topic name. - subscription:
subscription=\$\{subscription\}.\$\{subscription\}is the topic subscription name.
| Name | Type | Description |
|---|---|---|
| pulsar_subscription_back_log | Gauge | The total backlog of a subscription (messages). |
| pulsar_subscription_delayed | Gauge | The total number of messages are delayed to be dispatched for a subscription (messages). |
| pulsar_subscription_msg_rate_redeliver | Gauge | The total message rate for message being redelivered (messages/second). |
| pulsar_subscription_unacked_messages | Gauge | The total number of unacknowledged messages of a subscription (messages). |
| pulsar_subscription_blocked_on_unacked_messages | Gauge | Indicate whether a subscription is blocked on unacknowledged messages or not.
|
| pulsar_subscription_msg_rate_out | Gauge | The total message dispatch rate for a subscription (messages/second). |
| pulsar_subscription_msg_throughput_out | Gauge | The total message dispatch throughput for a subscription (bytes/second). |
Consumer metrics
Consumer metrics are only exposed when both
exposeTopicLevelMetricsInPrometheusandexposeConsumerLevelMetricsInPrometheusare set totrue.
All the consumer metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile. - namespace:
namespace=\$\{pulsar_namespace\}.\$\{pulsar_namespace\}is the namespace name. - topic:
topic=\$\{pulsar_topic\}.\$\{pulsar_topic\}is the topic name. - subscription:
subscription=\$\{subscription\}.\$\{subscription\}is the topic subscription name. - consumer_name:
consumer_name=\$\{consumer_name\}.\$\{consumer_name\}is the topic consumer name. - consumer_id:
consumer_id=\$\{consumer_id\}.\$\{consumer_id\}is the topic consumer id.
| Name | Type | Description |
|---|---|---|
| pulsar_consumer_msg_rate_redeliver | Gauge | The total message rate for message being redelivered (messages/second). |
| pulsar_consumer_unacked_messages | Gauge | The total number of unacknowledged messages of a consumer (messages). |
| pulsar_consumer_blocked_on_unacked_messages | Gauge | Indicate whether a consumer is blocked on unacknowledged messages or not.
|
| pulsar_consumer_msg_rate_out | Gauge | The total message dispatch rate for a consumer (messages/second). |
| pulsar_consumer_msg_throughput_out | Gauge | The total message dispatch throughput for a consumer (bytes/second). |
| pulsar_consumer_available_permits | Gauge | The available permits for for a consumer. |
Managed ledger bookie client metrics
All the managed ledger bookie client metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile.
| Name | Type | Description |
|---|---|---|
| pulsar_managedLedger_client_bookkeeper_ml_scheduler_completed_tasks_* | Gauge | The number of tasks the scheduler executor execute completed. The number of metrics determined by the scheduler executor thread number configured by managedLedgerNumSchedulerThreads in broker.conf. |
| pulsar_managedLedger_client_bookkeeper_ml_scheduler_queue_* | Gauge | The number of tasks queued in the scheduler executor's queue. The number of metrics determined by scheduler executor's thread number configured by managedLedgerNumSchedulerThreads in broker.conf. |
| pulsar_managedLedger_client_bookkeeper_ml_scheduler_total_tasks_* | Gauge | The total number of tasks the scheduler executor received. The number of metrics determined by scheduler executor's thread number configured by managedLedgerNumSchedulerThreads in broker.conf. |
| pulsar_managedLedger_client_bookkeeper_ml_workers_completed_tasks_* | Gauge | The number of tasks the worker executor execute completed. The number of metrics determined by the number of worker task thread number configured by managedLedgerNumWorkerThreads in broker.conf |
| pulsar_managedLedger_client_bookkeeper_ml_workers_queue_* | Gauge | The number of tasks queued in the worker executor's queue. The number of metrics determined by scheduler executor's thread number configured by managedLedgerNumWorkerThreads in broker.conf. |
| pulsar_managedLedger_client_bookkeeper_ml_workers_total_tasks_* | Gauge | The total number of tasks the worker executor received. The number of metrics determined by worker executor's thread number configured by managedLedgerNumWorkerThreads in broker.conf. |
| pulsar_managedLedger_client_bookkeeper_ml_scheduler_task_execution | Summary | The scheduler task execution latency calculated in milliseconds. |
| pulsar_managedLedger_client_bookkeeper_ml_scheduler_task_queued | Summary | The scheduler task queued latency calculated in milliseconds. |
| pulsar_managedLedger_client_bookkeeper_ml_workers_task_execution | Summary | The worker task execution latency calculated in milliseconds. |
| pulsar_managedLedger_client_bookkeeper_ml_workers_task_queued | Summary | The worker task queued latency calculated in milliseconds. |
Jetty metrics
For a functions-worker running separately from brokers, its Jetty metrics are only exposed when
includeStandardPrometheusMetricsis set totrue.
All the jetty metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile.
| Name | Type | Description |
|---|---|---|
| jetty_requests_total | Counter | Number of requests. |
| jetty_requests_active | Gauge | Number of requests currently active. |
| jetty_requests_active_max | Gauge | Maximum number of requests that have been active at once. |
| jetty_request_time_max_seconds | Gauge | Maximum time spent handling requests. |
| jetty_request_time_seconds_total | Counter | Total time spent in all request handling. |
| jetty_dispatched_total | Counter | Number of dispatches. |
| jetty_dispatched_active | Gauge | Number of dispatches currently active. |
| jetty_dispatched_active_max | Gauge | Maximum number of active dispatches being handled. |
| jetty_dispatched_time_max | Gauge | Maximum time spent in dispatch handling. |
| jetty_dispatched_time_seconds_total | Counter | Total time spent in dispatch handling. |
| jetty_async_requests_total | Counter | Total number of async requests. |
| jetty_async_requests_waiting | Gauge | Currently waiting async requests. |
| jetty_async_requests_waiting_max | Gauge | Maximum number of waiting async requests. |
| jetty_async_dispatches_total | Counter | Number of requested that have been asynchronously dispatched. |
| jetty_expires_total | Counter | Number of async requests requests that have expired. |
| jetty_responses_total | Counter | Number of responses, labeled by status code. The code label can be "1xx", "2xx", "3xx", "4xx", or "5xx". |
| jetty_stats_seconds | Gauge | Time in seconds stats have been collected for. |
| jetty_responses_bytes_total | Counter | Total number of bytes across all responses. |
Pulsar Functions
All the Pulsar Functions metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile. - namespace:
namespace=\$\{pulsar_namespace\}.\$\{pulsar_namespace\}is the namespace name.
| Name | Type | Description |
|---|---|---|
| pulsar_function_processed_successfully_total | Counter | Total number of messages processed successfully. |
| pulsar_function_processed_successfully_total_1min | Counter | Total number of messages processed successfully in the last 1 minute. |
| pulsar_function_system_exceptions_total | Counter | Total number of system exceptions. |
| pulsar_function_system_exceptions_total_1min | Counter | Total number of system exceptions in the last 1 minute. |
| pulsar_function_user_exceptions_total | Counter | Total number of user exceptions. |
| pulsar_function_user_exceptions_total_1min | Counter | Total number of user exceptions in the last 1 minute. |
| pulsar_function_process_latency_ms | Summary | Process latency in milliseconds. |
| pulsar_function_process_latency_ms_1min | Summary | Process latency in milliseconds in the last 1 minute. |
| pulsar_function_last_invocation | Gauge | The timestamp of the last invocation of the function. |
| pulsar_function_received_total | Counter | Total number of messages received from source. |
| pulsar_function_received_total_1min | Counter | Total number of messages received from source in the last 1 minute. |
Proxy
All the proxy metrics are labelled with the following labels:
- cluster:
cluster=\$\{pulsar_cluster\}.\$\{pulsar_cluster\}is the cluster name that you have configured in thebroker.conffile. - kubernetes_pod_name:
kubernetes_pod_name=\$\{kubernetes_pod_name\}.\$\{kubernetes_pod_name\}is the Kubernetes pod name.
| Name | Type | Description |
|---|---|---|
| pulsar_proxy_active_connections | Gauge | Number of connections currently active in the proxy. |
| pulsar_proxy_new_connections | Counter | Counter of connections being opened in the proxy. |
| pulsar_proxy_rejected_connections | Counter | Counter for connections rejected due to throttling. |
| pulsar_proxy_binary_ops | Counter | Counter of proxy operations. |
| pulsar_proxy_binary_bytes | Counter | Counter of proxy bytes. |
Pulsar SQL Worker
| Name | Type | Description |
|---|---|---|
| split_bytes_read | Counter | Number of bytes read from BookKeeper. |
| split_num_messages_deserialized | Counter | Number of messages deserialized. |
| split_num_record_deserialized | Counter | Number of records deserialized. |
| split_bytes_read_per_query | Summary | Total number of bytes read per query. |
| split_entry_deserialize_time | Summary | Time spent on derserializing entries. |
| split_entry_deserialize_time_per_query | Summary | Time spent on derserializing entries per query. |
| split_entry_queue_dequeue_wait_time | Summary | Time spend on waiting to get entry from entry queue because it is empty. |
| split_entry_queue_dequeue_wait_time_per_query | Summary | Total time spent on waiting to get entry from entry queue per query. |
| split_message_queue_dequeue_wait_time_per_query | Summary | Time spent on waiting to dequeue from message queue because is is empty per query. |
| split_message_queue_enqueue_wait_time | Summary | Time spent on waiting for message queue enqueue because the message queue is full. |
| split_message_queue_enqueue_wait_time_per_query | Summary | Time spent on waiting for message queue enqueue because the message queue is full per query. |
| split_num_entries_per_batch | Summary | Number of entries per batch. |
| split_num_entries_per_query | Summary | Number of entries per query. |
| split_num_messages_deserialized_per_entry | Summary | Number of messages deserialized per entry. |
| split_num_messages_deserialized_per_query | Summary | Number of messages deserialized per query. |
| split_read_attempts | Summary | Number of read attempts (fail if queues are full). |
| split_read_attempts_per_query | Summary | Number of read attempts per query. |
| split_read_latency_per_batch | Summary | Latency of reads per batch. |
| split_read_latency_per_query | Summary | Total read latency per query. |
| split_record_deserialize_time | Summary | Time spent on deserializing message to record. For example, Avro, JSON, and so on. |
| split_record_deserialize_time_per_query | Summary | Time spent on deserializing message to record per query. |
| split_total_execution_time | Summary | Total execution time . |